英语单词大全
词典释义 科林斯词典 例句

machined

英 [məˈʃiːnd] 美 [məˈʃiːnd]
COCA
machined
v.  (用机器)制造，加工成型
machine的过去分词和过去式
过去式：machined

COCA.31226

  1. N-COUNT 机器;机械
    A machine is a piece of equipment which uses electricity or an engine in order to do a particular kind of work.
    1. I put the coin in the machine and pulled the lever...
      我把硬币投入机器，拉动控制杆。
    2. The machine can be remotely operated and monitored.
      这台机器可以远程操作和监控。
    3. ...a color photograph of the sort taken by machine to be pasted in passports.
      那种由机器拍摄的护照用彩色照片
  2. VERB 用机器制造;用机器加工
    If you machine something, you make it or work on it using a machine.
    1. The material is machined in a factory...
      这种材料在一家工厂里用机器加工成型。
    2. All parts are machined from top grade, high tensile aluminium.
      所有零件都是用顶级高强度铝加工而成。
    3. ...machined brass zinc alloy gears.
      机器加工成型的铜锌合金齿轮
  3. N-COUNT 大型机构;严密组织
    You can use machine to refer to a large and well-controlled system or organization.
    1. ...Nazi Germany's military machine...
      纳粹德国的军事机构
    2. He has put the party publicity machine behind another candidate.
      他为另一位参选者在幕后组织政党宣传。
  4. N-COUNT （由于工作过于劳累或乏味）机械般工作的人，做工作不动脑筋的人
    If you say that someone is a machine, you mean that they are so tired or bored that they do their work without thinking.
    1. I think I have got to stop or I might turn into a machine...
      我想我得停下来了，否则我就会变成一台机器。
    2. He has dedicated himself to his work and become just a writing machine.
      他忘我地投入工作，就像是一台写作机器。
  5. See also: fruit machine sewing machine slot machine vending machine
  1. The material is machined in a factory
    这种材料在一家工厂里用机器加工成型。
  2. All parts are machined from top grade, high tensile aluminium.
    所有零件都是用顶级高强度铝加工而成。
  3. They machined the clothes.
    他们用机器制造衣服。
  4. The edge must be machined down to0.02 millimetres.
    这边缘必须切割到0.02毫米的精确度。
  5. The mating surface of curved sliding surfaces should be machined to the required surface finish from a single piece.
    弯曲滑动表面上的偶配表面应当由单块加工成需要的表面光洁度。
  6. It is readily machined to precision tolerances with conventional tooling.
    可以采用传统的刀具将其加工成具有一定精度公差的产品。
  7. The quality of the machined surface obtained by up milling is not very high.
    通过逆铣所得机加工表面质量不是很高。
  8. Cross correlation analysis on surface profile machined with abrasive jet precision finishing with grinding wheel as restraint;
    对砂轮约束磨粒喷射精密光整加工微观形貌进行功率谱分析和摩擦磨损特性研究。
  9. Tube and shaft cut and machined by CNC machines and Robots.
    钢管和轴承由CNC机器和机器人来切割和处理。
  10. The machined self lubricating composite tail rotor gears will stand up to the most aggressive 3D flying.
    悬停状态下直升机尾桨/尾梁耦合动力稳定性分析加工自润滑复合材料尾桨齿轮都会挺身而出最具侵略性3D飞行。
  11. Main gears are machined by gear grinding, the machine ensuring high precision and low noise.
    主要齿轮磨削加工齿轮的，机器保证精度高，噪音低。
  12. The device is also equipped with abrasive tools for grinding the machined surface.
    该设备还安装有磨削加工面的磨具。
  13. Because harden steel is difficult to machine. But when anneal, it can be easily machined.
    因为淬火后的钢很难进行加工，但退火后则很容易加工。
  14. Check critical sealing surfaces on seal and machined surfaces for signs of accidental damage, pitting, etc.
    检查密封上的密封表面标准和已经加工的表面并标出意外损坏，凹陷等。
  15. Programming and application of NC Program for workpiece machined by planer type miller is introduced.
    介绍了数控龙门铣床加工工件所用的数控程序的编制与应用。
  16. Holes are machined on lathes with various cutting tools.
    孔眼可用不同的切削刀具在车床上加工。
  17. Head and cap are machined from aluminum alloy.
    头部和上限从铝合金加工。
  18. The cylinder heads are machined on two machines.
    气缸盖安装在两个机器上。
  19. Cylindrical and spherical surfaces cannot be machined as accurately as a flat smooth surface.
    柱面和球面不可能加工得如同平坦光滑的表面一样精确。
  20. One piece wing ribs, stamped from CNC machined blanks have replaced the8 piece assembly.
    整体式机翼翼肋，由CNC数控机床整体冲压式的翼肋取代了8片组装式的肋骨。
  21. A series of technological experiments are made and a qualified3D-flow closed impeller is machined successfully.
    基于关键技术的解决，进行了某型三元流闭式叶轮组合电加工工艺试验，试制加工了合格零件。
  22. Four typical algorithms used in infrared image processing are studied in the simulation experiment of machined corrosion parts.
    本文通过机械加工模拟腐蚀件的实验，对红外热图像处理中的四种典型算法进行了研究。
  23. Head and cap are machined from ( 6061-T6) solid aluminum bar and anodized for corrosion resistance.
    头帽的加工和从（6061-扩建）固体铝棒和耐腐蚀的阳极。
  24. Mounting Surface: Convenient location precision machined to accept standard industrial fasteners.
    表面安装：方便定位精度加工接受标准工业紧固件。
  25. How can I find best CNC machined suppliers in Asia?
    我如何才能找到最佳的数控加工的供应商在亚洲？
  26. The end caps are accurately machined from precision square steel blocks.
    端帽准确地从精密加工方钢块。
  27. Jingcheng was founded in2006.It is a professional manufacturing enterprise for investment casting and machined products.
    我公司成立于2006年，是专业从事各类精密铸造和机械加工产品的生产企业。
  28. The inside diameter has more impurities and inclusions, which can be machined away.
    内径处则有较多的杂质和内含物，但可用机加工去除。
  29. I machined the cuffs, but the collar was done by hand.
    我用缝纫机缝制袖口，但领子是手工做的。